Mobile module:
4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps

3GPP Release:
Release 9

Status:
Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID

SMS:
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

USSD:
Supports sending and reading Unstructured Supplementary Service Data messages

Black/White list:
Operator black/white list

Multiple PDN:
Possibility to use different PDNs for multiple network access and services

Band management:
Band lock, Used band status display

APN:
Auto APN

Bridge:
Direct connection (bridge) between mobile ISP and device on LAN

Passthrough:
Router assigns its mobile WAN IP address to another device on LAN

Wireless mode:
IEEE 802.11b/g/n, Access Point (AP), Station (STA)

WiFi security:
WPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation

SSID/ESSID:
SSID stealth mode and access control based on MAC address

WiFi users:
Up to 50 simultaneous connections

Wireless Hotspot:
Captive portal (Hotspot), internal/external Radius server, built in customizable landing page

WAN:
1 x WAN port  10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

LAN:
1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

Routing:
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP)

Network protocols:
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)

VoIP passthrough support:
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

Connection monitoring:
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall:
Port forward, traffic rules, custom rules

DHCP:
Static and dynamic IP allocation, DHCP Relay, Relayd

QoS / Smart Queue Management (SQM):
Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

DDNS:
Supported >25 service providers, others can be configured manually

Network backup:
WiFi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover

Load balancing:
Balance Internet traffic over multiple WAN connections

Hotspot:
Captive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes

SSHFS:
Possibility to mount remote file system via SSH protocol

Authentication:
Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block

Firewall:
Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

Attack prevention:
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

VLAN:
Port and tag based VLAN separation

Mobile quota control:
Custom data limits for SIM card

WEB filter:
Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

Access control:
Flexible access control of TCP, UDP, ICMP packets, MAC address filter

OpenVPN:
Multiple clients and a server can run simultaneously, 27 encryption methods

OpenVPN Encryption:
DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,
BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256

IPsec:
IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)

GRE:
GRE tunnel, GRE tunnel over IPsec support

PPTP, L2TP:
Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support

Stunnel:
Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

DMVPN:
Method of building scalable IPsec VPNs

SSTP:
SSTP client instance support

ZeroTier:
ZeroTier VPN client support

WireGuard:
WireGuard VPN client and server support

Tinc:
Tinc offers encryption, authentication and compression in it’s tunnels. Client and server support.

ID range:
Respond to one ID in range [1;255] or any

Allow Remote Access:
Allow access through WAN

Custom registers:
MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality

Supported functions:
01, 02, 03, 04, 05, 06, 15, 16

Supported data formats:
8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

MODBUS DATA TO SERVER:
Protocol: HTTP(S), MQTT, Azure MQTT

MQTT Gateway:
Allows sending commands and receiving data from MODBUS Master through MQTT broker

DNP3 Supported modes:
TCP Master, DNP3 Outstation

WEB UI:
HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log

FOTA:
Firmware update from server, automatic notification

SSH:
SSH (v1, v2)

SMS:
SMS status, SMS configuration, send/read SMS via HTTP POST/GET

Call:
Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, WiFi on/off

TR-069:
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

MQTT:
MQTT Broker, MQTT publisher

SNMP:
SNMP (v1, v2, v3), SNMP Trap

JSON-RPC:
Management API over HTTP/HTTPS

MODBUS:
MODBUS TCP status/control

RMS:
Teltonika Remote Management System (RMS)

Cloud of Things:
Allows monitoring of: Device data, Mobile data, Network info, Availability

ThingWorx:
Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type

Cumulocity:
Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength

Azure IoT Hub:
Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type

CPU:
Mediatek MIPS 24Kc 580 MHz

RAM:
128 MB, DDR2

FLASH storage:
16 MB, SPI Flash

WEB UI:
Update FW from file, check FW on server, configuration profiles, configuration backup

FOTA:
Update FW

RMS:
Update FW/configuration for multiple devices at once

Keep settings:
Update FW without losing current configuration

Operating system:
RutOS (OpenWrt based Linux OS)

Supported languages:
Busybox shell, Lua, C, C++

Development tools:
SDK package with build environment provided

Input:
1 x Digital Input, 0 – 6 V detected as logic low, 8 – 30 V detected as logic high

Output:
1 x Digital Output, Open collector output, max output 30 V, 300 mA

Events:
Email, RMS, SMS

I/O juggler:
Allows to set certain I/O conditions to initiate event

Connector:
4-pin industrial DC power socket

Input voltage range:
9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max

PoE (passive):
Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, LAN1 Port, 9 – 50 VDC

Power consumption:
< 6.5 W Max

Ethernet:
2 x RJ45 ports, 10/100 Mbps

I/O’s:
1 x Digital Input, 1 x Digital Output on 4-pin power connector

Status LEDs:
3 x Connection type status LEDs, 5 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED

SIM:
1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder

Power:
1 x 4-pin power connector

Antennas:
2 x SMA for LTE, 1 x RP-SMA for WiFi antenna connectors

Reset:
Reboot/User default reset/Factory reset button

Casing material:
Aluminium housing, plastic panels

Dimensions (W x H x D):
83 x 25 x 74 mm

Weight:
125 g

Mounting options:
Bottom and sideways DIN rail mounting slots

Operating temperature:
-40 °C to 75 °C

Operating humidity:
10% to 90% non-condensing

Ingress Protection Rating:
IP30

Regulatory:
CB

Safety Standards:
IEC 62368-1:2018 (CB Scheme)