Description
Mobile
-
5G Sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4×4 MIMO), 900/600 Mbps UL (2×2); 4G (LTE) – LTE Cat 20 2.0Gbps DL, 200Mbps UL; 3G – 42 Mbps DL, 5.76Mbps UL
-
2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
-
Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID, Carrier aggregation
-
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
-
Supports sending and reading Unstructured Supplementary Service Data messages
-
Operator black/white list
-
Possibility to use different PDNs for multiple network access and services
-
Band lock, Used band status display
-
-
Direct connection (bridge) between mobile ISP and device on LAN
-
Router assigns its mobile WAN IP address to another device on LAN
Wireless
-
802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
-
WPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
-
-
up to 150 simultaneous connections
-
Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
-
Wireless mesh (802.11s), fast roaming (802.11r)
Ethernet
-
1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
-
4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
Network
-
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP)
-
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)
-
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
-
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
-
Port forward, traffic rules, custom rules
-
Static and dynamic IP allocation, DHCP Relay, Relayd
-
QoS / Smart Queue Management (SQM)
Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
-
Supported >25 service providers, others can be configured manually
-
WiFi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
-
Balance Internet traffic over multiple WAN connections
-
Internal/external Radius server, captive portal, built in customizable landing page
-
Possibility to mount remote file system via SSH protocol
Security
-
Pre-shared key, digital certificates, X.509 certificates
-
Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
-
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
-
Port and tag based VLAN separation
-
Custom data limits for both SIM cards
-
Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
-
Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
-
Multiple clients and a server can run simultaneously, 12 encryption methods
-
DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
-
IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
-
-
Client/Server instances can run simultaneously, L2TPv3 support
-
Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
-
Method of building scalable IPsec VPNs
-
SSTP client instance support
-
ZeroTier VPN client support
-
WireGuard VPN client and server support
MODBUS TCP SLAVE
-
Respond to one ID in range [1;255] or any
-
-
MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality
MODBUS TCP MASTER
-
01, 02, 03, 04, 05, 06, 15, 16
-
8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
MODBUS DATA TO SERVER
-
HTTP(S), MQTT, Azure MQTT
MQTT Gateway
-
Allows sending commands and receiving data from MODBUS Master through MQTT broker
DNP3
-
TCP Master, DNP3 Outstation
Monitoring & Management
-
HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
-
Firmware update from server, automatic notification
-
-
SMS status, SMS configuration, send/read SMS via HTTP POST/GET
-
Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, WiFi on/off
-
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
-
MQTT Broker, MQTT publisher
-
SNMP (v1, v2, v3), SNMP Trap
-
Management API over HTTP/HTTPS
-
MODBUS TCP status/control
-
Teltonika Remote Management System (RMS)
IoT Platforms
-
Allows monitoring of: Device data, Mobile data, Network info, Availability
-
Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
-
Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
-
Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type
System Characteristics
-
Quad-core ARM Cortex A7, 717 MHz
-
256 MB (100 MB available for userspace)
-
256 MB (80 MB available for userspace)
Firmware / Configuration
-
Update FW from file, check FW on server, configuration profiles, configuration backup, restore point
-
-
Update FW/configuration for multiple devices at once
-
Update FW without losing current configuration
Firmware Customization
-
RutOS (OpenWrt based Linux OS)
-
Busybox shell, Lua, C, C++
-
SDK package with build environment provided
Location Tracking
-
GPS, GLONASS, BeiDou, Galileo and QZSS
-
GNSS coordinates via WebUI, SMS, TAVL, RMS
-
-
NTRIP protocol (Networked Transport of RTCM via Internet Protocol)
-
Supported server software TAVL, RMS
-
Configurable multiple geofence zones
USB
-
-
Samba share, USB-to-serial
-
Possibility to connect external HDD, flash drive, additional modem, printer
-
Input / Output
-
1 x Digital Input, 0 – 6 V detected as logic low, 8 – 30 V detected as logic high
-
1 x Digital Output, Open collector output, max output 30 V, 300 mA
-
-
Allows to set certain I/O conditions to initiate event
Power
-
4-pin industrial DC power socket
-
9 – 50 VDC, reverse polarity protection, surge protection >51 VDC 10us max
-
Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, LAN1 Port, 9 – 50 VDC
-
Physical Interfaces (Ports, LEDs, Buttons, SIM)
-
5 x RJ45 ports, 10/100/1000 Mbps
-
1 x Digital Input, 1 x Digital Output on 4-pin power connector
-
3 x connection status LEDs, 3 x connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1x Power LED, 2 x 2.4G and 5G WiFi LEDs
-
PHYSICAL INTERFACES SIM RUT #07
2 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V
-
1 x 4-pin power connector
-
2 x SMA for LTE, 2 x RP-SMA for WiFi
-
1 x USB A port for external devices, 1 x USB A port for external devices
-
Reboot/User default reset/Factory reset button
-
Physical Specification
-
-
-
-
DIN rail (can be mounted on two sides), flat surface placement
Operating Environment
-
-
10% to 90% non-condensing
-
Ingress Protection Rating
Download the Teltonika RUTX50 Flyer here: RUTX50 Flyer
Download the Teltonika RUTX50 Datasheet here: RUTX50 Datasheet
Don’t forget your Teltonika RMS Credits, for sea,less management of your devices. Available on this webshop.
Useful Videos:
For further technical information on the Teltonika RUTX50 please contact sales@comms365.com
More information on Teltonika can be seen at their website – Teltonika Website – Routers
Remember, Comms365 is a leading provider of 3G, 4G and 5G connectivity solutions. We deliver the services from our own network that is interconnected with all the UK mobile operators as well as International Carriers. We have a range of tariffs and bespoke solutions that are tried, tested and guaranteed to work with all the devices we sell.
Don’t forget to order your Fixed Public IP SIM from us, please contact us for details.
Genuine Static Public IP’s available.
Rent a router on an easy to set up, affordable plan.
Back to 5G Routers from other manufacturers